Bio-rad ChromLab™ Software Manuel d'utilisateur Page 76
- Page / 178
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
3 | Setting Up NGC Chromatography Systems
74 | NGC Chromatography Systems and ChromLab Software
To connect an external device to the DAC A and DIGITAL OUT ports
1. On the back of the SIM, firmly grasp the DAC A connector and pull it straight
out of its port.
Note: ChromLab supports solely the DAC A port. When connecting an
analog instrument, use the DAC port on the right (DAC A).
2. (Optional) If you want the NGC instrument to trigger the device to start
measuring data, also remove the DIGITAL OUT connector and perform the
steps that follow.
3. Locate the green flathead screwdriver included in the SIM’s accessory kit.
4. Loosen the positive, ground, and terminal 2 screws on the connectors.
Note: Terminal 1 on the DIGITAL OUT connector is reserved for the
autosampler
. Do not insert the trigger wire into terminal 1. Terminal 2 is the
second screw from the right.
5. Locate the output cable that ships with your DAC device.
6. If connectors are attached to both ends of the cable, remove the connector that
does not insert into your device.
Tip: Alternatively, contact the manufacturer for a suitable cable.
7. If necessary, strip the plastic wire coating off the wires so that they are
exposed.
8. Determine the positive, ground, and trigger wires on the cable.
- Chromatography Systems 1
- Software 1
- Installation Guide 1
- NGC™ Chromatography 3
- Systems and 3
- ChromLab™ Software 3
- Table of Contents 5
- Installation Guide 7
- 1 Introduction 9
- Main Features 10
- Safety Information 11
- Regulatory Information 12
- FCC Warning and Notes 13
- Finding Out More 14
- 2 Preparing Your Site 15
- Item Specification 16
- Room Requirements 17
- Environment 18
- Power Requirements 19
- ChromLab System Requirements 20
- Installation Guide 21
- To turn off automatic updates 22
- To change the font size 22
- 3 Setting Up NGC 23
- Chromatography Systems 23
- NGC Systems Accessories Kit 24
- NGC Scout Accessories Kit 25
- NGC Discover Accessories Kit 25
- Attaching the Touch Screen 26
- Installation Guide 27
- Installation Guide 29
- Installation Guide 31
- Installation Guide 33
- Installation Guide 35
- Installation Guide 37
- Stand kit (#788-5040) 38
- Installation Guide 39
- Installation Guide 41
- Installation Guide 43
- To install the pH probe 44
- Installation Guide 45
- Installation Guide 47
- Upper expansion tier 48
- Previously attached 48
- Installation Guide 49
- Installation Guide 51
- Task: Refer to the section: 52
- Inserting Additional Modules 53
- Installation Guide 55
- Installation Guide 57
- Connecting the Air Sensors 58
- Installation Guide 59
- Installation Guide 61
- UV monitor 62
- Installation Guide 63
- Connecting the Air Sensors 64
- (air sensor to pump inlet) 65
- To activate the air sensors 67
- Installation Guide 69
- Installation Guide 71
- Installation Guide 73
- Installation Guide 75
- Trigger wire 77
- Positive 77
- Installation Guide 79
- Installation Guide 81
- 4 Installing ChromLab 83
- Software 83
- Installing ChromLab Software 84
- The wizard installs ChromLab 85
- Software and the NGC Systems 86
- Installation Guide 87
- Setting the System Name 88
- Installation Guide 89
- On the ChromLab Computer 90
- ChromLab computer 91
- On the NGC Instrument 92
- Installation Guide 93
- Setting Delay Volume 95
- Installation Guide 97
- 5 Plumbing and Priming the 99
- Buffer Bottles 100
- Waste Bottles 100
- Plumbing NGC Systems 101
- Plumbing All NGC Systems 102
- Sample Pump Wash Line 103
- System Pumps Wash Lines 103
- To plumb the sample pump 105
- Installation Guide 107
- Plumbing the NGC Quest System 108
- Installation Guide 109
- To plumb the system pumps 110
- Plumbing the NGC Scout System 111
- To plumb the pH valve 113
- Installation Guide 115
- Tubing color Port Solution 117
- Installation Guide 121
- Plumbing Sample Inlet Valves 122
- Plumbing Outlet Valves 123
- Installation Guide 125
- To prime the system pumps 126
- To purge the system pumps 127
- Priming the NGC Scout System 129
- Purging the NGC Scout System 131
- Priming NGC Discover Systems 133
- Installation Guide 135
- To prime the sample pump 137
- Installation Guide 139
- Installation Guide 141
- To purge the sample pump 143
- Installation Guide 145
- Calibrating the Instrument 146
- To zero the pressure 147
- A Upgrading ChromLab 149
- Updating NGC Systems 150
- Installation Guide 151
- B Troubleshooting ChromLab 153
- Possible Cause Solution 154
- Installation Guide 157
- Installation Guide 159
- Installation Guide 161
- Installation Guide 163
- NGC ChromLab Application 164
- Firmware Update Failure 165
- C Connecting the C-96 167
- Installation Guide 169
- To prepare the tubing 170
- Autosampler 171
- Sample Inject 171
- Installation Guide 173
- D Firewall Configuration 175
- Life Science 178
- Bio-Rad 178
- Laboratories, Inc 178
Produits connexes et manuels pour Instruments de mesure Bio-rad ChromLab™ Software
Instruments de mesure Bio-rad BioLogic QuadTec™ Detector and Components Manuel d'utilisateur
(58 pages)
(58 pages)
Instruments de mesure Bio-rad LP Data View Software for BioLogic LP System Manuel d'utilisateur
(4 pages)
(4 pages)
Instruments de mesure Bio-rad LP Data View Software for BioLogic LP System Manuel d'utilisateur
(5 pages)
(5 pages)
Instruments de mesure Bio-rad Profinia™ Protein Purification Instrument Manuel d'utilisateur
(4 pages)
(4 pages)
Instruments de mesure Bio-rad Profinia™ Protein Purification Instrument Manuel d'utilisateur
(2 pages)
(2 pages)
Instruments de mesure Bio-rad Profinia Protein Purification System Accessories Manuel d'utilisateur
(1 pages)
(1 pages)
Master Appliance Proheat 1610 STC Dual Mode Heat Gun manuals
Owner’s manuals and user’s guides for Power tools Master Appliance Proheat 1610 STC Dual Mode Heat Gun.
We providing 1 pdf manuals Master Appliance Proheat 1610 STC Dual Mode Heat Gun for download free by document types: User Manual
Commentaires sur ces manuels