Bio-rad ChromLab™ Software Manuel d'utilisateur télécharger pdf (Page 118)

5 | Plumbing and Priming the NGC Chromatography Systems

116 | NGC Chromatography Systems and ChromLab Software

To plumb the buffer inlet valves

1. Connect tubing from Outlet A on the buffer blending valve to port 8/BB on

buffer inlet valve A.

2. Connect tubing from Outlet B on the buffer blending valve to port 8/BB on inlet

valve B.

3. Connect tubing from the Out port on inlet valve A to the inlet manifold of system

pump A.

4. Connect tubing from the Out port on inlet valve B to the inlet manifold of

system pump B.

5. (Optional) Connect inlet tubing to ports 2–7 on both buffer inlet valves A and B.

To plumb the sample pump

1. Connect inlet tubing to the sample pump inlet manifold.

2. Immerse the other end of the inlet tubing in a bottle of degassed, deionized

water

3. Connect outlet tubing to the Sample Pump port on the sample inject valve.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 177 178

Pas de commentaire

Bio-rad ChromLab™ Software Manuel d'utilisateur Page 118