Bio-rad ChromLab™ Software Manuel d'utilisateur télécharger pdf (Page 135)

Priming and Purging the System

Installation Guide | 133

7. Insert a 30 ml syringe into the priming port on system pump A.

8. Turn the priming port valve counter

-clockwise one full turn to open the seal.

9. Slowly withdraw the

plunger to withdraw liquid f

rom the port

until

air no

longer enters the syringe (approximately 10 ml)

and all tubing is filled with

liquid.

10. Turn the priming port valve clockwise to close the port.

11. Remove the syringe from the priming port and discard the liquid into waste.

12. Repeat steps 7–11 for ports Q3–Q1.

13. To prime system pump B, select port Q3 and perform steps 7–11.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 177 178

Pas de commentaire

Bio-rad ChromLab™ Software Manuel d'utilisateur Page 135