Bio-rad ProteinChip Data Manager Software Manuel d'utilisateur télécharger pdf (Page 27)

Page 22

ProteinChip SELDI System: Reader Guide

10. Replace the load lock door by screwing it clockwise back on to the post.

11. Tighten the door until it seals against the O-ring.

12. Unscrew the load lock door about 1/2 turn until it is in the open position

(cutout in door should match opening in load lock).

13. Carefully replace the pawl drive assembly, lining up the posts on the load

lock door with the pawl drive plate. Take care not to catch the load lock

door home sensor wires between the pawl drive plate and the autoloader

mounting plate (Fig. 21).

Fig. 21: Load lock door sensor wires.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

Pas de commentaire

Bio-rad ProteinChip Data Manager Software Manuel d'utilisateur Page 27