Bio-rad BioLogic QuadTec™ Detector and Components Manuel d'utilisateur télécharger pdf (Page 18)

The traces shown on the Manual screen chromatogram and printed report are chosen in the Chromatogram

Settings window, shown in Figure 2-6. From the system toolbar, select the Settings button to display the

Manual screen Chromatogram Settings window. Select the traces from the Trace Device drop-down menu.

Select up to eight traces. Select the Visible checkbox to indicate whether or not the trace is to be visible on

the screen.

Figure 2-6. Manual Screen Chromatogram Settings

To set the QuadTec detector’s Time Constant, select Manual Setup from the Options drop-down menu. In

the Manual Setup screen, shown below, enter the QuadTec Time Constant. The Time Constant value

smooths the signal with a time filter. The default value of 1.0 seconds is suitable for most applications.

Figure 2-7. Manual Setup Screen

USE WITH THE BIOLOGIC DUO-FLOW SYSTEMSYSTEM INSTALLATION AND SETUP

2-7

Cancel

Default

-0.000

Settings for the Manual Mode

Y-axis settings

Trace Device Visible UnitsBaseline

2.000

Axis Max

Conductivity

SIM1/Signal

SIM1/pH

SIM2/Signal

SIM2/pH

GP-pressure

QuadTec-1 (220 nm)

QuadTec-2 (280 nm)

QuadTec-3 (250 nm)

QuadTec-4 (595 nm)

%Buffer B

Chromatogram Settings

Cancel

0.000

0.0 sec.

EGP Split Time Period

Select SIM

SIM 1

Minimum

1.000

Maximum

VoltUnits:

Units Range:

0.000

1.000

Device Output Range

(Volts):

Manual Setup

Edit Signal Input Module 1 - Signal

1.0 sec.

QuadTec Time Constant

10.00 ml/min

Gradient Pump : F-10 Purge FlowRate

SIM 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Bio-rad BioLogic QuadTec™ Detector and Components Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Bio-rad BioLogic QuadTec™ Detector and Components