Bio-rad Model EP-1 Econo Pump Manuel d'utilisateur télécharger pdf (Page 6)

Section 3

Unpacking and Setting Up

3.1 Unpacking Instructions

Carefully remove the unit from the shipping box, lifting from the

handle on the back of the pump or from the bottom of the instrument.

Remove the plastic bag and inspect the instrument for any external damage.

Parts included with the Model EP-1 Econo Pump are illustrated in Figure

3.1. Check off all parts against the supplied packing list.

Your Model EP-1 Econo Pump was carefully tested at the factory and

was shipped in good working order. If any part is missing or damaged,

contact Bio-Rad Laboratories immediately. Refer to Figure 3.1 for the

proper identification designation of any missing or damaged part(s).

Also includes: Instruction Manual

Fig. 3.1. Parts supplied with the Model EP-1 Econo Pump.

Tubing and Fitting

Starter Kit

Power Cord

Model EP-1 Econo Pump

M7318140J.qxp 4/17/2006 2:17 PM Page 3

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Pas de commentaire

Bio-rad Model EP-1 Econo Pump Manuel d'utilisateur Page 6