Bio-rad iMark Microplate Absorbance Reader Manuel d'utilisateur télécharger pdf (Page 15)

iMark Microplate Absorbance Reader Instruction Manual

The first time the instrument is turned on, or after a battery failure, the following default information is held in the

memory.

1. Both Administrator and Common user security passwords are set to "00000".

2. Laboratory name is "Bio-Rad Laboratories".

3. All wavelength values of the filters are set to "---" nm.

4. The date and time of the calendar chip are set to 1 day, 1 month, 00 year, 0 hour and 0 minute.

5. No plate reading data is available.

6. End-point protocol is chosen and the protocol number is set to #1.

7. No standard curve data for the storage of standard curves and graphs is available.

Limits

The Microplate Reader displays absorbance readings with absolute values as 3.500. Out-of-range absorbance

values, (those with absolute values greater than 3.500) are displayed as either "*.***" or "-*.***". For example, if

the absorbance is 4.500, then the display will read "*.***", and if the absorbance is -4.500, the display will read

"-*.***".

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Pas de commentaire

Bio-rad iMark Microplate Absorbance Reader Manuel d'utilisateur Page 15