Bio-rad Model EG-1 Econo™ Gradient Monitor Manuel d'utilisateur télécharger pdf (Page 16)

Appendix A

Fuse Replacement

Figure A. Fuse removal.

1. Disconnect unit from power source.

2. Remove the fuse cover with a small-blade screwdriver or similar tool.

3. Pull the fuse holder out of the fuse compartment and, if necessary,

replace the fuse. Use 5 mm x 20 mm fuse, type T, 1A.

4. Reinsert the fuse holder, with fuse, into the fuse compartment.

Appendix B

Rear Panel Connections

The signal output socket is an 8-pin circular mini-DIN. The fol-

lowing information is provided for those wishing to interface the Model

EG-1 Econo Gradient Monitor with equipment such as integrators or chart

recorders which do not utilize banana plug connectors.

Pin Function

1 No Contact

2 No Contact

3 No Contact

4 No Contact

5 Chart Recorder (+)

6 Chart Recorder (-)

7 No Contact

8 No Contact

Pin configuration

M7318150H 2/27/1 2:06 PM Page 13

1 2 ... 11 12 13 14 15 16 17 18 19

Pas de commentaire

Bio-rad Model EG-1 Econo™ Gradient Monitor Manuel d'utilisateur Page 16